MS acrylic clear coat Troton Zircon 2:1 | 0.5 + 0.25 L Set

MS acrylic clear coat Troton Zircon 2:1 | 0.5 + 0.25 L Set
search
€39.40 Tax included

32.03 € tax excl.

Dostępny
Best brands
Fast shipping
20 years in business

2-component acrylic clearcoat with high gloss and increased resistance to scratches SR (Scratch resistant). Characterized by its universal use. Clear coat features easy application and is ready to use without the addition of thinner.

18 Items
24-48h
Paczkomaty - 10.90 zł / Kurier - 13.90 zł
Hardener
  • Standard
  • Fast
  • Slow
Quantity

 Advantages
  • Ready to use without the addition of thinner.
  • Easy application and universal in use.
  • High gloss.
  • Hard and durable finish.
  • Increased scratch resistance.
  • Good fluidity.
 Application
Performance

1 liter of the mixture is enough to paint 8÷10 m2 of surface with a layer thickness of 60 μm.

Substrates

ZIRCON MS 2:1 2K acrylic clearcoat can be applied ove base coats, existing coatings in good condition after sanding and degreasing.

Mixing ratio by volume
  • Clear coat 2
  • Hardener: 1
  • Thinner: 0%
Polishing

Usually polishing is unnecessary, as the ZIRCON MS 2:1 gives the surface a perfect finish immediately after application. However, if some dirt inclusions appear, we recommend removing them and then polishing the surface with an abrasive compound.

Shading

Make sure you have covered all the surface with the clear coat. You should only shade the surface that has been covered and treated. Use InterTroton FADE OUT THINNER to clean any dust or dirt from the surface and to level out the optical gloss differences between the older and new applied coating.

 General Notes 
  • Do not exceed recommended doses of the hardener!
  • The best repair results can be achieved by painting at room temperature. The temperature in the body shop and the temperature of the product should be similar.
  • When working with 2K products, it is recommended to use personal protection equipment. Protect the eyes and airways.
  • The rooms should be well ventilated.
  • Clean the guns and equipment immediately after use.
adr-ios-50.png Caution

To maintain safety, always follow the instructions given in the MSDS for the products.

VOC for mixture = 539 g/L
Troton
14939
Clear coat use
MS
5900763004299
6
You might also like

Inter Troton Silicon Remover | 1 L

Mixture of organic solvents that effectively cleans the surface of various contaminants, including grease, oils, silicones, etc. The use of the remover allows to avoid such painting defects as: fish eye and small craters.

€4.99

4.06 € tax excl.

keyboard_arrow_left
keyboard_arrow_right

Paint tape 50 m | addsTroton

A high-quality masking tape showing very good adhesion on irregular surfaces, it is easy to remove without the risk of leaving adhesive. Thanks to its saturated paper coating, it is compatible with most popular paints and varnishes. Suitable for automotive repairs at temperatures not exceeding...

€6.49

5.28 € tax excl.

Inter Troton Thinner for Acrylic Systems | 1 L

Thinner for acrylic systems is a mixture of carefully chosen organic solvents. Product intended for the dilution of acrylic products – Troton clear coats and primers. Allows the achievement of a product with strictly defined parameters, ensuring their proper application, fluidity and drying.

€5.95

4.84 € tax excl.

Customers who bought this product also bought:

Thinner for acrylic systems Master Troton | 1 L

Thinner for acrylic systems is a mixture of specially combined organic solvents. it is dedicated for acrylic products – Troton clear coats and primers. It allows the achievement of a final product with clearly defined parameters, ensuring proper application, levelling and curing.

€6.45

5.24 € tax excl.

Troton acrylic Top Coat MS 2:1 RAL 9005 | 1 + 0.5 L set

2-component acrylic topcoat with increased scratch resistance SR (Scratch Resistant) and highly resistant to climatic factors. Features perfect finish immediately after application. Does not require clear coat.

€0.00

0 € tax excl.

keyboard_arrow_left
keyboard_arrow_right

Paint tape 50 m | addsTroton

A high-quality masking tape showing very good adhesion on irregular surfaces, it is easy to remove without the risk of leaving adhesive. Thanks to its saturated paper coating, it is compatible with most popular paints and varnishes. Suitable for automotive repairs at temperatures not exceeding...

€6.49

5.28 € tax excl.

Inter Troton Silicon Remover | 1 L

Mixture of organic solvents that effectively cleans the surface of various contaminants, including grease, oils, silicones, etc. The use of the remover allows to avoid such painting defects as: fish eye and small craters.

€4.99

4.06 € tax excl.

Acryl Filler 5:1 Acrylic primer Troton | 0.5 + 0.1L Set

2K high build acrylic primer designed for car body repairs. Universal high filling primer with very good adhesion to aluminum surfaces and excellet vertical stability. Available in 7 colors.

€34.10

27.72 € tax excl.

14 other products in the same category:

Acrylic clearcoat Troton MATT 2:1 | 1+0.5 L set

High-quality matt acrylic clearcoat with a special effect. Intended for specialized repairs of car body parts that require a matt finish. It allows to obtain an evenly matt surface as well as a strong and durable finish.

€92.90

75.53 € tax excl.

HS acrylic clear coat Troton Crystal | 1+0.5L set

High quality 2-component HS acrylic clearcoat recommended for complete or fast partial car body repairs. The product creates a hard and crystal clear coating with increased scratch resistance (SR), which does not change the shade of the basecoat colour.

€75.70

61.54 € tax excl.

Acrylic clear coat Master Troton C18 Ultimate Rapid Drying VHS 2:1 | 1+0.5 L set

High-quality 2K acrylic clearcoat for quick car body repairs and with very low content of volatile compounds. C18 clearcoat is a product designed for smart repairs and bodyshops that have to quickly return the repaired vehicle. The use of raw materials of the latest generation allows the...

€127.40

103.58 € tax excl.

copy of HS acrylic clear coat Troton Crystal | 1+0.5L set

High quality 2-component HS acrylic clearcoat recommended for complete or fast partial car body repairs. The product creates a hard and crystal clear coating with increased scratch resistance (SR), which does not change the shade of the basecoat colour.

€44.90

36.5 € tax excl.

copy of MS acrylic clear coat Troton Diament HS 2:1 | 1+0.5L Set

2-component acrylic clearcoat intended for overall carbody coating. Diament creates a hard coating with high gloss and increased scratch resistance SR ( scratch resistant). Simple mixing of components without the need to add thinner and easy application make this a very universal in use...

€72.65

59.07 € tax excl.

Acrylic clear coat Master Troton UHS 2007 | 1 + 0.5 L set

2K acrylic clearcoat with ultra high solids content for car body repairs. Ideal for whole car body repair with perfect leveling and great resistance to UV rays and other harmful climatic conditions. The product is ready to use without the addition of thinner, easy to mix and apply.

€89.79

73 € tax excl.

Acrylic clear coat Master Troton HS 2:1 | 1+0.5 L set

High-quality 2K HS acrylic clearcoat with low content of volatile compounds and increased scratch resistance SR (Scratch Resistant). Designed for both spot repairs and complete painting of the car body.

€79.99

65.03 € tax excl.

Acrylic clear coat Master Troton C108 HS 2:1 | 1+0.5L set

High-quality 2K HS acrylic clearcoat for car body repairs with a low content of volatile compounds and increased scratch resistance SR (Scratch Resistant). Features high glossy finish and mechanical resistance.

€87.50

71.14 € tax excl.

Acrylic clear coat Master Troton C88 Premium Speed HS 2:1 | 1+0.5L Set

High-quality 2K acrylic clearcoat for quick car body repairs with low VOC and increased scratch resistance SR (Scratch Resistant). Thanks to the use of modern raw materials, the C88 PREMIUM HS clearcoat is characterized by its short drying time and optimal working window, allowing for a...

€90.40

73.5 € tax excl.

MS acrylic clear coat Troton Diament HS 2:1 | 1+0.5L Set

2-component acrylic clearcoat intended for overall carbody coating. Diament creates a hard coating with high gloss and increased scratch resistance SR ( scratch resistant). Simple mixing of components without the need to add thinner and easy application make this a very universal in use...

€70.69

57.47 € tax excl.

Acrylic clear coat Master Troton C38 2:1 VHS |1+0.5 L set

High-quality 2K acrylic clearcoat for car repairs with a very low content of volatile compounds. The short drying time (3 hours at 20 ° C) combined with the extended pot life of the mixture allows for partial and overall paiting of the entire car body.

€96.80

78.7 € tax excl.

MS acrylic clear coat Troton Zircon 2:1 | 1 + 0.5L Set

2-component acrylic clearcoat with high gloss and increased resistance to scratches SR (Scratch resistant). Characterized by its universal use. Clear coat features easy application and is ready to use without the addition of thinner.

€67.80

55.12 € tax excl.