Long open time and good stability on vertical elements allow the achievement, if desired, of an orange peel effect (structure) identical to the original factory painting.
Advantages
- Crystal clear coating.
- Very high gloss.
- Good stability on vertical elements.
- Long open time and very good overspray absorption.
- Ability to create the desired structure identical to the original factory painting.
- Hard and durable finish.
- High scratch resistance.
- Availability of 3 versions of hardener (standard, fast, slow)
Application
Performance
1 liter of the mixture is enough to paint 9 m2 of surface with a layer thickness of 50 μm.
Substrates
Crystal HS 2:1 2K acrylic clearcoat can be applied over: base coats, existing coatings in good condition after sanding and degreasing.
Mixing ratio by volume
- Clear coat 2
- Hardener: 1
- Thinner: 10%
Polishing
Usually polishing is unnecessary, as the CRYSTAL HS 2:1 gives the surface a perfect finish immediately after application. However, if some dirt inclusions appear, we recommend removing them and then polishing the surface with an abrasive compound.
Shading
Make sure you have covered all the surface with the clear coat. You should only shade the surface that has been covered and treated. Use InterTroton FADE OUT THINNER to clean any dust or dirt from the surface and to level out the optical gloss differences between the older and new applied coating.
General Notes
- Do not exceed recommended doses of the hardener!
- The best repair results can be achieved by painting at room temperature. The temperature in the body shop and the temperature of the product should be similar.
- When working with 2K products, it is recommended to use personal protection equipment. Protect the eyes and airways.
- The rooms should be well ventilated.
- Clean the guns and equipment immediately after use.
Caution
To maintain safety, always follow the instructions given in the MSDS for the products.
 |
VOC for mixture = 529 g/L |
