Advantages
- Short drying time / reduces the repair time
- Very high solids content (VOC 355 g/l).
- High final hardness and mechanical resistance.
- Very high gloss
- Excellent finish.
Application
Performance
1 liter of the mixture is enough to paint 10÷11 m2 of surface with a layer thickness of 60 μm.
Mixing ratio by volume
- Clearcoat: 2
- Hardener: 1
- Clearcoat does not require addition of thinner!
Polishing
Usually polishing is unnecessary, as the C18 VHS Clear Coat 2:1 gives the surface a perfect finish immediately after application. However, if some dirt inclusions appear, we recommend removing them and then polishing the surface with an abrasive compound.
Shading
Make sure you have covered all the surface with the clear coat. You should only shade the surface that has been covered and treated. Use InterTroton FADE OUT THINNER to clean any dust or dirt from the surface and to level out the optical gloss differences between the older and new applied coating.
General Notes
- Do not exceed recommended doses of the hardener!
- The best repair results can be achieved by painting at room temperature. The temperature in the body shop and the temperature of the product should be similar.
- When working with 2K products, it is recommended to use personal protection equipment. Protect the eyes and airways.
- The rooms should be well ventilated.
- Clean the guns and equipment immediately after use.
Caution
To maintain safety, always follow the instructions given in the MSDS for the products.
 |
VOC for mixture = 355 g/L |