Soft and filling polyester putty InterTroton| 0.25 kg - 4.3 kg

Soft and filling polyester putty InterTroton| 0.25 kg - 4.3 kg
search
€12.50 Tax included

10.16 € tax excl.

Dostępny
Best brands
Fast shipping
20 years in business

2-component soft sanding and high filling polyester putty designed for car repairs. Recommended for filling large dents and holes. Can be applied in thick layers with no sagging. Due to its flexibility, it is perfect for creating shapes and filling dents on surfaces with complex contours.

45 Items
24-48h
Paczkomaty - 10.90 zł / Kurier - 13.90 zł
Weight
  • 250 g
  • 400 g
  • 1.8 kg
  • 4.3 kg
Quantity

 Advantages
  • Easy to mix and apply.
  • Proper hardness with good elasticity.
  • Good sanding properties.
 Tech data
Colour  beige
Gloss grade  matt
Density  1,77 (+/- 0,03) kg/l  
 Substrates

The product has very good adhesion to various surfaces. It can be applied over:

  • Bare steel and aluminum after flatting and degreasing,
  • Zinc coated steel after flatting and degreasing,
  • Sanded glass fibre (GFK/GRP), polyester putties, acrylic and epoxy primers and existing coatings in good condition,
  • Well sanded old and factory top coats.

We recommend sandpaper with gradations: P80÷P120.

 Do not apply the putty directly on the reactive primers, 1K acrylic and nitrocellulose products.

Layer thickness

Putty can be applied in several thin coats. After each of them the product should cure. Do not exceed the thickness of 5 mm

Pot life is 4÷7 minutes at 20°C

Hardening time

20÷30 minutes at 20°C. Temperature below 20°C significantly increases the hardening time.

Sanding
  • - Coarse sanding (dry): P80÷P120,
  • - Finishing sanding (dry): P120÷P320.
Further work

Polyester putties can be over coated with:

  • - 2K polyester putties.
  • - 2K polyester spray fillers.
  • - 2K acrylic fillers.
  • - 2K epoxy fillers.
 General notes
  • Excessive amount of hardener will cause problems with bleaching of the topcoat!
  • When working with 2K products, it is recommended to use personal protection equipment. Protect the eyes and respiratory system.
  • Clean the guns and equipment immediately after use.
  • The rooms should be well ventilated
adr-ios-50.png Caution

To maintain safety, always follow the instructions given in the MSDS for the products.

VOC for mixture = 61g/L
Troton
1131
Zastosowanie szpachli
wypełniająca
5900763011167
You might also like

8 other products in the same category:

Filling polyester body filler with Aluminum Inter Troton| 0.25 kg - 1.8 kg

Filling polyester putty with the addition of aluminum particles, intended for filling large and deep dents and holes on larger surfaces. It is characterized by good heat dissipation and increased resistance to mechanical vibrations. Especially recommended for repairing car body elements...

€49.10

39.92 € tax excl.

Finishing polyester body filler Inter Troton Fine | 0.25 - 1.8 kg

Fine finishing polyester putty for the repair of small ripples, pinholes and scratches. Ideal for smoothing out scratches left by structural glass fibre type fillers. Easy to apply with no dragging effetc. Features perfect smooth finish after sanding.

€23.19

18.85 € tax excl.

Polyester Spray Filler Inter Troton | 1 - 3 kg

Spray polyester filler creates a perfectly smooth surface, even on large vertical pannels.Ideal for for filling scratches left from application of polyester putties. Requires addition of thinner.

€33.90

27.56 € tax excl.