Polyester putty with high elasticity Inter Troton Plastic | 0.25 - 0.7kg

Polyester putty with high elasticity Inter Troton Plastic | 0.25 - 0.7kg
search
€0.00 Tax included

0 € tax excl.

Product available with different options
Best brands
Fast shipping
20 years in business

Polyester putty with high elasticity, great adhesion and mechanical resistance. Especilly dedicated for the repair of plastic elements of the car body subject to vibrations.

0 Items
24-48h
Paczkomaty - 10.90 zł / Kurier - 13.90 zł
Quantity

 Advantages
  • Very good adhesion to plastic.
  • Exceptional flexibility.
  • Good sanding properties.
  • Very smooth surface after application and sanding.
 Tech data
Colour  dark grey
Gloss grade  matt
Density  1.86 (+/- 0.03) kg/l  
 Substrates

The product has very good adhesion to all outer plastic panels (PP, EPDM, ABS, PC, PPO, PA, RTPU, PBTP, PVC, PUR, PUR soft foam, UP-GF).

Before applying, the surface should be cleaned well with an abrasive needled cloth and degreased with detergent and water (do not use benzene based removers as they can dissolve the surface). Wash again using water and detergent, rinse with pure water and dry with air.

 Do not apply the putty directly on the reactive primers, 1K acrylic and nitrocellulose products.

Layer thickness

Body filler can be applied in several thin layers. Before applying each new coat wait until the latter has fully dried. Do not exceed a total thickness of 3 mm.

Pot life 3÷4 min. at 20°C

Drying time

25÷35 min. at 20°C. Temperatures below 20°C significantly increase the drying time.

Sanding
  • Coarse sanding (dry): P80÷P120.
  • Final sanding (dry): P120÷P180.
Further work

Polyester body fillers can over coated with:

  • - 2K acrylic primers,
  • - 2K epoxy primers.

It is recommended to apply 1K Plastic Primer before applying the plastic putty.

 General notes
  • Excessive amount of hardener will cause problems with bleaching of the topcoat!
  • When working with 2K products, it is recommended to use personal protection equipment. Protect the eyes and respiratory system.
  • Clean the guns and equipment immediately after use.
  • The rooms should be well ventilated
adr-ios-50.png Caution

To maintain safety, always follow the instructions given in the MSDS for the products.

VOC for mixture = 26g/L
Troton
2376-2374
Zastosowanie szpachli
do plastiku
You might also like

Customers who bought this product also bought:

HS acrylic clear coat Troton Crystal | 1+0.5L set

High quality 2-component HS acrylic clearcoat recommended for complete or fast partial car body repairs. The product creates a hard and crystal clear coating with increased scratch resistance (SR), which does not change the shade of the basecoat colour.

€75.70

61.54 € tax excl.

Acrylic clear coat Master Troton C108 HS 2:1 | 5+2.5 L set

High-quality 2K HS acrylic clearcoat for car body repairs with a low content of volatile compounds and increased scratch resistance SR (Scratch Resistant). Features high glossy finish and mechanical resistance.

€387.40

314.96 € tax excl.

Inter Troton Thinner for Acrylic Systems | 1 L

Thinner for acrylic systems is a mixture of carefully chosen organic solvents. Product intended for the dilution of acrylic products – Troton clear coats and primers. Allows the achievement of a product with strictly defined parameters, ensuring their proper application, fluidity and drying.

€5.95

4.84 € tax excl.

Inter Troton Silicon Remover | 1 L

Mixture of organic solvents that effectively cleans the surface of various contaminants, including grease, oils, silicones, etc. The use of the remover allows to avoid such painting defects as: fish eye and small craters.

€4.99

4.06 € tax excl.

8 other products in the same category:

Polyester Spray Filler Inter Troton | 1 - 3 kg

Spray polyester filler creates a perfectly smooth surface, even on large vertical pannels.Ideal for for filling scratches left from application of polyester putties. Requires addition of thinner.

€33.90

27.56 € tax excl.

Soft and filling polyester putty InterTroton| 0.25 kg - 4.3 kg

2-component soft sanding and high filling polyester putty designed for car repairs. Recommended for filling large dents and holes. Can be applied in thick layers with no sagging. Due to its flexibility, it is perfect for creating shapes and filling dents on surfaces with complex contours.

€12.50

10.16 € tax excl.

Filling polyester body filler with Aluminum Inter Troton| 0.25 kg - 1.8 kg

Filling polyester putty with the addition of aluminum particles, intended for filling large and deep dents and holes on larger surfaces. It is characterized by good heat dissipation and increased resistance to mechanical vibrations. Especially recommended for repairing car body elements...

€49.10

39.92 € tax excl.

Finishing polyester body filler Inter Troton Fine | 0.25 - 1.8 kg

Fine finishing polyester putty for the repair of small ripples, pinholes and scratches. Ideal for smoothing out scratches left by structural glass fibre type fillers. Easy to apply with no dragging effetc. Features perfect smooth finish after sanding.

€23.19

18.85 € tax excl.