Filling polyester body filler with Aluminum Inter Troton| 0.25 kg - 1.8 kg

Filling polyester body filler with Aluminum Inter Troton| 0.25 kg - 1.8 kg
search
€49.10 Tax included

39.92 € tax excl.

Dostępny
Best brands
Fast shipping
20 years in business

Filling polyester putty with the addition of aluminum particles, intended for filling large and deep dents and holes on larger surfaces. It is characterized by good heat dissipation and increased resistance to mechanical vibrations. Especially recommended for repairing car body elements exposed to temperature changes.

18 Items
24-48h
Paczkomaty - 10.90 zł / Kurier - 13.90 zł
Weight
  • 250 g
  • 400 g
  • 1.8 kg
Quantity

 Advantages
  • Very good adhesion to metal.
  • Good heat dissipation.
  • Exceptional sanding properties.
 Tech data
Colour  dark grey
Gloss grade  matt
Density  1.82 (+/- 0.03) kg/l  
 Substrates

The product has very good adhesion to various surfaces. It can be applied over:

  • Steel and aluminum after flatting and degreasing.
  • Zinc coated steel after flatting and degreasing.
  • Sanded glass fibre (GFK/GRP), polyester putties, acrylic and epoxy primers.
  • Well sanded old or factory top coats.

 Do not apply the putty directly on the reactive primers, 1K acrylic and nitrocellulose products.

Layer thickness

Body filler can be applied in several thin layers. Before applying each new coat wait until the latter has fully dried. Do not exceed a total thickness of 3 mm.

Pot life 4÷7 min. at 20°C

Drying time

20÷30 min. at 20°C. Temperatures below 20°C significantly increase the drying time.

Sanding
  • Coarse sanding (dry): P80÷P120.
  • Final sanding (dry): P120÷P320.
Further work

Polyester body fillers can over coated with:

  • - 2K polyester body fillers,
  • - 2K polyester spray fillers,
  • - 2K acrylic primers,
  • - 2K epoxy primers.
 General notes
  • Excessive amount of hardener will cause problems with bleaching of the topcoat!
  • When working with 2K products, it is recommended to use personal protection equipment. Protect the eyes and respiratory system.
  • Clean the guns and equipment immediately after use.
  • The rooms should be well ventilated
adr-ios-50.png Caution

To maintain safety, always follow the instructions given in the MSDS for the products.

VOC for mixture = 31g/L
Troton
1227
Zastosowanie szpachli
wypełniająca
5900763012270
You might also like

Customers who bought this product also bought:

Inter Troton Silicon Remover | 1 L

Mixture of organic solvents that effectively cleans the surface of various contaminants, including grease, oils, silicones, etc. The use of the remover allows to avoid such painting defects as: fish eye and small craters.

€4.99

4.06 € tax excl.

8 other products in the same category:

Polyester Spray Filler Inter Troton | 1 - 3 kg

Spray polyester filler creates a perfectly smooth surface, even on large vertical pannels.Ideal for for filling scratches left from application of polyester putties. Requires addition of thinner.

€33.90

27.56 € tax excl.

Soft and filling polyester putty InterTroton| 0.25 kg - 4.3 kg

2-component soft sanding and high filling polyester putty designed for car repairs. Recommended for filling large dents and holes. Can be applied in thick layers with no sagging. Due to its flexibility, it is perfect for creating shapes and filling dents on surfaces with complex contours.

€12.50

10.16 € tax excl.

Finishing polyester body filler Inter Troton Fine | 0.25 - 1.8 kg

Fine finishing polyester putty for the repair of small ripples, pinholes and scratches. Ideal for smoothing out scratches left by structural glass fibre type fillers. Easy to apply with no dragging effetc. Features perfect smooth finish after sanding.

€23.19

18.85 € tax excl.