Advantages
- Fast drying
- Excellent covering properties
- Easy and fast sanding
Technical data
| COLOUR: |
grey, white, black, ecru, graphite, red |
| GLOSS GRADE: |
matt |
Application
Acrylic primer 5:1 can be applied over:
- Steel and aluminum after flatting and degreasing.
- Zinc coated steel and galvanized steel after flatting and degreasing.
- anded glass polyester laminates (GFK/GRP).
- Polyester body fillers and putties
- Epoxy primers.
- Wash primers.
- Old coatings in good condition.
- Good surface preparation is essential to achieve the best repair results.
Mixing proportion per volume
- Primer: 5
- Hardener: 1
- Thinner: 25÷30%
Mix thoroughly until a homogeneous consistency is obtained.
Drying time
- 3-4 hours at 20°C
- 30 minutes at 60°C.
Temperatures below 20°C significantly increases the hardening time.
Further work
2K acrylic fillers can be directly over coated with:
- 2K acrylic topcoats.
- 1K basecoats.
General notes
- Do not exceed recommended doses of the hardener!
- The best repair results can be achieved by painting at room temperature.
- The temperature in the body shop and the temperature of the product should be similar.
- When working with 2K products, it is recommended to use personal protection equipment.
- Protect the eyes and airways.
- The rooms should be well ventilated.
- Clean the guns and equipment immediately after use.
Caution
To maintain safety, always follow the instructions given in the MSDS for the products.
 |
VOC for mixture = 538g/L |