Anticorrosive Isolation Primer 3:1 Troton | Fast 0.75 + 0.25 L

Anticorrosive Isolation Primer 3:1 Troton | Fast 0.75 + 0.25 L
search
€57.60 Tax included

46.83 € tax excl.

Dostępny
Best brands
Fast shipping
20 years in business

High quality 2K acrylic primer with anti-corrosion additives. It is a perfect isolating primer for car repairs. Perfetly protects sanded bare steel and isolates difficult surfaces and putties from topcoats, preventing mapping effects. Ideal spreading and fast drying time allows primer to be applied wet on wet. Does not require sanding.

12 Items
24-48h
Paczkomaty - 10.90 zł / Kurier - 13.90 zł
Colour
Quantity

 Advantages
  • Very good anticorrosive protection. of steel surfaces.
  • Strong adhesion to various substrates.
  • Very good isolating properties.
  • Short hardening time.
  • Suitable for wet on wet application.
 Technical data
COLOUR:  white, lightgrey, black
GLOSS GRADE:  matt
 Application

Wet on Wet Acrylic Primer 3:1 can be applied over:

  • Steel and aluminum after flatting and degreasing.
  • Zinc coated steel and galvanized steel after flatting and degreasing. S
  • anded glass polyester laminates (GFK/GRP). P
  • olyester body fillers and putties
  • Epoxy primers.
  • Wash primers.
  • Old coatings in good condition.
Mixing proportion per volume
  • Primer: 3
  • Hardener: 1
  • Thinner (black version): 35% for wet on wet, 15% for sanding.
  • Thinner (grey and white versions): 35% for wet on wet, 20% for sanding.

Mix thoroughly until a homogeneous consistency is obtained.

Drying time
  • Drying time at 20°C:
  • Isolation primer /30÷50 µm/ ready for sanding ater 2÷3 hours.
  • Drying time at 60°C
  • Isolation primer /30÷50 µm/ ready for sanding after baking for about 15÷20 minutes and cooling down (approx. 1hour)
  • Temperatures below 20°C significantly increases the hardening time.
Further work

2K acrylic fillers can be directly over coated with:

  • - 2K top coats.
  • - 1K base coats.
  • - 2K polyester putties
  • - 2K acrylic primers
 General notes 
  • Do not exceed recommended doses of the hardener!
  • The best repair results can be achieved by painting at room temperature.
  • The temperature in the body shop and the temperature of the product should be similar.
  • When working with 2K products, it is recommended to use personal protection equipment.
  • Protect the eyes and airways.
  • The rooms should be well ventilated.
  • Clean the guns and equipment immediately after use.
adr-ios-50.png Caution

To maintain safety, always follow the instructions given in the MSDS for the products.

VOC for mixture = 538g/L
Troton
2113
Primer type
Anticorrosion
Primer type
Wet to wet
5900763021135
6
You might also like
keyboard_arrow_left
keyboard_arrow_right

Paint tape 50 m | addsTroton

A high-quality masking tape showing very good adhesion on irregular surfaces, it is easy to remove without the risk of leaving adhesive. Thanks to its saturated paper coating, it is compatible with most popular paints and varnishes. Suitable for automotive repairs at temperatures not exceeding...

€6.49

5.28 € tax excl.

Inter Troton Thinner for Acrylic Systems | 1 L

Thinner for acrylic systems is a mixture of carefully chosen organic solvents. Product intended for the dilution of acrylic products – Troton clear coats and primers. Allows the achievement of a product with strictly defined parameters, ensuring their proper application, fluidity and drying.

€5.95

4.84 € tax excl.

Customers who bought this product also bought:

Acrylic clear coat Master Troton C38 2:1 VHS |1+0.5 L set

High-quality 2K acrylic clearcoat for car repairs with a very low content of volatile compounds. The short drying time (3 hours at 20 ° C) combined with the extended pot life of the mixture allows for partial and overall paiting of the entire car body.

€96.80

78.7 € tax excl.

Multifunctional polyester body filler MASTER AMBER Troton | 1L

Multifunctional lightweight polyester body filler for fast car body repair. Combines high filling and finishing qualitites in one product. Ideal for the repair of medium and small damages. Thanks to its light weight can be applied on large surfaces, ensuring smooth finish and easy sanding.

€46.60

37.89 € tax excl.

Troton Base Coat 1K Silver AT418 - 1 L

Fast drying 1K silver basecoat dedicated for car body refinishing. AT418 version - very fine grain. Product should be used with thinner for basecoat systems. Silver 1K base coat can be mixed with other colors. Volume 1 litre.

€71.80

58.37 € tax excl.

Troton Base Coat 1K Black - 1 L

 Fast drying 1K basecoat dedicated for car body refinishing. Product should be used with thinner for basecoat systems. Colour black, volume 1 litre.

€79.10

64.31 € tax excl.

3 other products in the same category:

Multifunctional acrylic primer DTM Primer Sealer 4:1 Troton | 0.8 + 0.2L Set

High-quality multifunctional 2-component acrylic primer with anti-corrosion additives. Thanks to the use of advanced technology and high-class ingredients, the product has a very wide range of applications. It works perfectly both as a filling undercoat and an insulating primer. 

€64.90

52.76 € tax excl.