Technical data
| Color |
black |
| Gloss grade |
matt, semigloss, gloss |
| Yield |
1.5 - 2 m2 |
| Volume |
500 ml |
Application
The product is designed to be applied to processed and untreated wooden, metal, glass, aluminum, stone and surfaces made of various plastics. The surface to be coated should be clean, dry and degreased. Splashes of old varnish and rust should be removed beforehand and the surface sanded. In the case of plastic, it is advisable, before starting varnishing work, to heat the element at 50°C, which will facilitate the removal of silicone compounds from its surface.
- The best temperature for aerosol application is 15 ÷ 25°C.
- Before use, shake the container about 2 - 3 minutes and try the spray on a cardboard box.
- When varnishing, hold the aerosol at a distance of 25 ÷ 30 cm from the painted surface.
- Apply the varnish in several thin layers at intervals of no more than 5 ÷ 10 minutes.
- Shake the aerosol again before applying each layer.
- It is recommended to set the aerosol with the valve down and press the button releasing the contents for about 5 seconds after finishing the application
Drying time
- dust dry: after about 5 - 15 minutes
- fully dry: after about 24 hours
Caution
To maintain safety, always follow the instructions given in the MSDS for the products.
 |
VOC for mixture = 714,3g/L |