The product is designed to be applied to processed and untreated wooden, metal, glass, aluminum, stone surfaces and those made of various types of plastic. In the case of plastic, it is advisable, before starting varnishing work, to anneal the element at 50°C, which will facilitate the removal of silicone compounds from its surface.
The surface to be coated should be clean, dry and degreased. Splashes of old varnish and rust should be removed beforehand and the surface sanded.
Good surface preparation is essential to achieve the best repair results.
Tech data
| Color |
silver |
| Gloss grade |
high gloss |
| Yeld |
1.25 – 1.75 m2/ 400 ml |
Application
The best temperature for aerosol application is 15 ÷ 25°C.
- - Before use, shake the container about 2 - 3 minutes and try the spray on a cardboard box.
- - Keep the aerosol at a distance of 25 ÷ 30 cm from the painted surface when painting.
- - Apply the varnish in several thin layers at intervals of no more than 5 ÷ 10 minutes. Shake the aerosol again before applying each layer.
- - It is recommended to set the aerosol with the valve down and press the button releasing the contents for about 5 seconds after finishing the application - this will improve the re-use of the product and preserve its existing properties, as well as protect the nozzle from possible clogging.
Note: for safety purposes, always follow the data on the Material Safety Data Sheet for the product.
Drying times (at 20°C)
- - dust dry: after about 5 - 10 minutes
- - touch dry: after about 20 - 30 minutes
- - full dryness: after about 24 hours
Caution
To maintain safety, always follow the instructions given in the MSDS for the products.
 |
VOC for mixture = 676,6g/L |