Troton acrylic Top Coat MS 2:1 RAL 5005 | 3.75L

€225.90 Tax included

183.66 € tax excl.

Dostępny

Best brands

Fast shipping

20 years in business

2-component acrylic topcoat with increased scratch resistance SR (Scratch Resistant) and highly resistant to climatic factors. Features perfect finish immediately after application. Does not require clear coat.

In stock : 3 Items

Delivery: 24-48h

Shipping cost : Paczkomaty - 10.90 zł / Kurier - 13.90 zł

Quantity

Main advantages

Very glood flow.
High covering.
Strong and durable finish.

Tech data

Gloss grade	high gloss
Mixing ration	2:1+10%
Drying time	20 min in 60 C
Performance	8-10 m2 / 1L mixture

APPLICATION

Acrylic topcoats can be applied over:

2K acrylic primers.
2K epoxy primers.
Old paint coatings in good condition after matting and degreasing.

Good surface preparation is essential to achieve the best repair results.

Mixing ratio by volume

Paint: 2
Hardener: 1
Thinner: 10%

Performance

1 liter of the mixture is enough to paint a surface of 8 ÷ 10 m2 with a layer of 50 μm.

Number of layers

2 full layers.

Drying time

Dust dry at 20°C: about 15 minutes
Baking at 60°C: about 20 minutes
Temperatures below 20°C significantly increases the drying time.

Polishing and eliminating defects

Usually polishing is unnecessary, as the RAL Acrylic Clear Coat gives the surface a perfect look immediately after use. However, if some dirt inclusions appear, it is recommended to remove them using with polishing compound.

GENERAL NOTES

Do not exceed recommended doses of hardener!
The best repair results can be achieved by painting at room temperature.
Temperature in the body shop and temperature of the product should be the same.
When working with 2K products, it is recommended to use personal protection equipment. Protect the eyes and air ways.
The rooms should be well ventilated.
Clean the guns and equipment immediately after use.

CAUTION

Caution: To maintain safety, always follow the instructions given in the MSDS of the products.

VOC for mixture = 550 g/l

Brand Troton

Reference 13652

Data sheet

Pojemność: 3.75 litra

EAN 5900763001205

Ilość w kartonie: Items

KT_Troton_RAL

SDS_Troton_RAL_col

Inter Troton Thinner for Acrylic Systems | 1 L

Thinner for acrylic systems is a mixture of carefully chosen organic solvents. Product intended for the dilution of acrylic products – Troton clear coats and primers. Allows the achievement of a product with strictly defined parameters, ensuring their proper application, fluidity and drying.

€5.95

4.84 € tax excl.