The clear coat is designed to be applied to substrates made of various types of plastics.

The surface to be coated should be carefully degreased and cleaned beforehand. It is recommended, before starting varnish work, to warm up the element at 50°C, which will facilitate the removal of silicone compounds from its surface.

Note: The clear coat has no adhesion to polyethylene (PE).

 Tech data

 Application

• - The best temperature for aerosol application is 15÷25°C.
• - Before use, shake the aerosol for 2 minutes and try the spray on a cardboard box.
• - Keep the aerosol at a distance of 25÷30 centimeters from the painted surface when painting.
• - Apply the paint in two thin coats at intervals of no more than 5-10 minutes. Shake the aerosol again before applying each successive layer.
• - It is recommended to set the aerosol with the valve down and press the button releasing the contents for about 5 seconds after finishing the application - this will improve the re-use of the product and preserve its existing properties, as well as protect the nozzle from possible clogging.

Note: for safety purposes, always follow the data on the Material Safety Data Sheet for the product.

Coverage: 2-3 coats

Recommended wet film thickness: 100 μm

Recommended dry film thickness: 15-25 μm

Drying times (at 20°C)*

• - dust dry: after about 15 minutes
• - touch dry: after about 30 minutes
• - full dryness: after 1 hour

*Drying time depends on temperature, humidity and film thickness.

 Caution

To maintain safety, always follow the instructions given in the MSDS for the products.

VOC for mixture = 652g/L